LF Energy projects provide a unified approach to developing non-differentiating code that can enable the world’s power systems to transform rapidly to electrification. LF Energy provides a neutral leveraged development environment that can accelerate the pace of innovation and target investments in a coordinated and efficient manner.
Projects
Hover over one of our projects to learn more
- All Projects
- Data Standards and Tooling
- Digital Substations
- EV Charging
- Grid Operations
- Grid Simulation and Modeling
Arras
Arras, formerly known as HiPAS GridLab-D, has emerged as an important open-source tool for utilities, researchers, and technology vendors in the development, maturation, and deployment of smart-grid and renewable energy resource integration technology.
Learn More
Battery Data Alliance
Building sustainable open source software, best practices, and deliver standards for the battery industry
Learn More
Carbon Data Specification (CDS)
The Carbon Data Specification (CDS) is a data dictionary for raw data and a standard for data requirements that enable energy data access for measuring, quantifying, and tracking carbon emissions from energy production and consumption.…
Learn More
CitrineOS
Open source charger network software for rapid OCPP 2.0.1 and NEVI compliant EV charge management.
Learn More
CoMPAS
The primary goal of the CoMPAS project is to develop open source software components related to IEC 61850 model implementation, specifically for profile management and configuration of a power industry Protection Automation and Control System…
Learn More
covXtreme
covXtreme is a model and software for hazard risk analysis of extreme events. covXtreme estimates penalised piecewise constant covariate marginal and conditional extreme value models, and allows environmental contour estimation.
Learn More
Dynawo
The nature of power system dynamics is deeply evolving towards more diverse and difficult to predict behaviors due to the massive changes going on in power systems.
Learn More
EVerest
The primary goal of EVerest is to develop and maintain an open source software stack for EV charging infrastructure. By digitally abstracting the complexity of multiple standards and use cases, EVerest will run on any…
Learn More
FledgePOWER
FledgePOWER is a multi-protocol translation gateway for power systems based on the industrial IoT LF Edge project Fledge.
Learn More
FlexMeasures
Developing energy flexibility apps & services (e.g. to enable demand response) is crucial, but expensive. FlexMeasures is the intelligent & developer-friendly EMS to support real-time energy flexibility apps, rapidly and scalable.
Learn More
GEISA
GEISA complements other initiatives by creating the production-grade, secure technical foundation for a robust and open grid edge “app” ecosystem in constrained edge devices.
Learn More
Grid Capacity Map
Grid Capacity Map is a map that provides public information about grid capacity and grid connection cost to give an early indication to customers seeking grid connection.
Learn More
GridFM
GridFM is an open source framework to enable the emergence of foundation models for power grids.
Learn More
GRIP
GRIP (Grid Resilience and Intelligence Platform) is a cutting-edge software platform designed to help electric grid operators anticipate, mitigate against, and recover from the effects of extreme weather events.
Learn More
GXF
Grid eXchange Fabric (GXF) is a software platform that enables hardware monitoring and control in the public space. GXF provides several functions out of the box and provides scalability & high availability, high security, a…
Learn More
Hyphae
With energy resources and infrastructure increasingly challenged to meet the coming impacts of climate change and natural disasters, Hyphae aims to make the grid more resilient and flexible with microgrids.
Learn More
OpenDSM
OpenDSM (formerly OpenEEmeter) is an open-source library used to measure the impacts of demand-side programs by using historical data to fit models and then create predictions (counterfactuals) to compare to post-intervention, observed energy usage.
Learn More
OpenGEH
OpenGEH ( GEH stands for Green Energy Hub ) enables fast, flexible settlement and hourly measurements of production and consumption of electricity. OpenGEH seeks to help utilities to onboard increased levels of renewables by reducing…
Learn More
OpenSTEF
OpenSTEF provides automated machine learning pipelines to deliver accurate, self-correcting, and explainable forecasts of the load on the grid for the next 48 hours.
Learn More
OpenSynth
OpenSynth is a new, global open community designed to democratize synthetic data, to accelerate the decarbonization of global energy systems.
Learn More
Power Grid Model
Power Grid Model is a high-performance Python/C++ library for steady-state distribution power system analysis.
Learn More
PowSyBl
PowSyBl (Power System Blocks) is an open source library dedicated to electrical grid modeling and simulation.
Learn More
Real Time Data Ingestion Platform (RTDIP)
Real Time Data Ingestion Platform (RTDIP) aims to provide easy access to high-volume, historical and real-time process data for analytics applications, engineers, and data scientists wherever they are.
Learn More
SC Decarbonisation Hub
SC Decarbonisation Hub (SCDH) provides visibility into, and the ability to manage, suppliers' Scope 3 emissions.
Learn More
SEAPATH
SEAPATH, Software Enabled Automation Platform and Artifacts (THerein), aims at developing a “reference design” and “industrial grade” open source real-time platform that can run virtualized automation and protection applications (for the power grid industry in…
Learn More
Shapeshifter
Shapeshifter implements the Universal Smart Energy Framework for flexibility forecasting, offering, ordering, and settlement processes.
Learn More
SOGNO
The project Service-based Open-source Grid automation platform for Network Operation of the future (SOGNO) is creating plug-and-play, cloud-native, micro-services to implement our next generation of data-driven monitoring and control systems.
Learn More
Super Advanced Meter (SAM)
The Super Advanced Meter is an open source specification project focusing on a widely applicable smart meter data gateway.
Learn More
TROLIE
Accelerating the implementation of interoperable systems for the exchange of transmission facility ratings.
Learn MoreBattery Data Alliance
Building sustainable open source software, best practices, and deliver standards for the battery industry
Learn MoreCarbon Data Specification (CDS)
The Carbon Data Specification (CDS) is a data dictionary for raw data and a standard for data requirements that enable energy data access for measuring, quantifying, and tracking carbon emissions from energy production and consumption.…
Learn MoreOpenDSM
OpenDSM (formerly OpenEEmeter) is an open-source library used to measure the impacts of demand-side programs by using historical data to fit models and then create predictions (counterfactuals) to compare to post-intervention, observed energy usage.
Learn MoreOpenGEH
OpenGEH ( GEH stands for Green Energy Hub ) enables fast, flexible settlement and hourly measurements of production and consumption of electricity. OpenGEH seeks to help utilities to onboard increased levels of renewables by reducing…
Learn MoreOpenSynth
OpenSynth is a new, global open community designed to democratize synthetic data, to accelerate the decarbonization of global energy systems.
Learn MoreSC Decarbonisation Hub
SC Decarbonisation Hub (SCDH) provides visibility into, and the ability to manage, suppliers' Scope 3 emissions.
Learn MoreSuper Advanced Meter (SAM)
The Super Advanced Meter is an open source specification project focusing on a widely applicable smart meter data gateway.
Learn MoreTROLIE
Accelerating the implementation of interoperable systems for the exchange of transmission facility ratings.
Learn MoreCoMPAS
The primary goal of the CoMPAS project is to develop open source software components related to IEC 61850 model implementation, specifically for profile management and configuration of a power industry Protection Automation and Control System…
Learn MoreFledgePOWER
FledgePOWER is a multi-protocol translation gateway for power systems based on the industrial IoT LF Edge project Fledge.
Learn MoreSEAPATH
SEAPATH, Software Enabled Automation Platform and Artifacts (THerein), aims at developing a “reference design” and “industrial grade” open source real-time platform that can run virtualized automation and protection applications (for the power grid industry in…
Learn MoreCitrineOS
Open source charger network software for rapid OCPP 2.0.1 and NEVI compliant EV charge management.
Learn MoreEVerest
The primary goal of EVerest is to develop and maintain an open source software stack for EV charging infrastructure. By digitally abstracting the complexity of multiple standards and use cases, EVerest will run on any…
Learn MoreFlexMeasures
Developing energy flexibility apps & services (e.g. to enable demand response) is crucial, but expensive. FlexMeasures is the intelligent & developer-friendly EMS to support real-time energy flexibility apps, rapidly and scalable.
Learn MoreGEISA
GEISA complements other initiatives by creating the production-grade, secure technical foundation for a robust and open grid edge “app” ecosystem in constrained edge devices.
Learn MoreGXF
Grid eXchange Fabric (GXF) is a software platform that enables hardware monitoring and control in the public space. GXF provides several functions out of the box and provides scalability & high availability, high security, a…
Learn MoreHyphae
With energy resources and infrastructure increasingly challenged to meet the coming impacts of climate change and natural disasters, Hyphae aims to make the grid more resilient and flexible with microgrids.
Learn MoreReal Time Data Ingestion Platform (RTDIP)
Real Time Data Ingestion Platform (RTDIP) aims to provide easy access to high-volume, historical and real-time process data for analytics applications, engineers, and data scientists wherever they are.
Learn MoreShapeshifter
Shapeshifter implements the Universal Smart Energy Framework for flexibility forecasting, offering, ordering, and settlement processes.
Learn MoreSOGNO
The project Service-based Open-source Grid automation platform for Network Operation of the future (SOGNO) is creating plug-and-play, cloud-native, micro-services to implement our next generation of data-driven monitoring and control systems.
Learn MoreArras
Arras, formerly known as HiPAS GridLab-D, has emerged as an important open-source tool for utilities, researchers, and technology vendors in the development, maturation, and deployment of smart-grid and renewable energy resource integration technology.
Learn MorecovXtreme
covXtreme is a model and software for hazard risk analysis of extreme events. covXtreme estimates penalised piecewise constant covariate marginal and conditional extreme value models, and allows environmental contour estimation.
Learn MoreDynawo
The nature of power system dynamics is deeply evolving towards more diverse and difficult to predict behaviors due to the massive changes going on in power systems.
Learn MoreGrid Capacity Map
Grid Capacity Map is a map that provides public information about grid capacity and grid connection cost to give an early indication to customers seeking grid connection.
Learn MoreGridFM
GridFM is an open source framework to enable the emergence of foundation models for power grids.
Learn MoreGRIP
GRIP (Grid Resilience and Intelligence Platform) is a cutting-edge software platform designed to help electric grid operators anticipate, mitigate against, and recover from the effects of extreme weather events.
Learn MoreOpenSTEF
OpenSTEF provides automated machine learning pipelines to deliver accurate, self-correcting, and explainable forecasts of the load on the grid for the next 48 hours.
Learn MorePower Grid Model
Power Grid Model is a high-performance Python/C++ library for steady-state distribution power system analysis.
Learn MorePowSyBl
PowSyBl (Power System Blocks) is an open source library dedicated to electrical grid modeling and simulation.
Learn More
